SRP185HV High Modulus Non-Conductive Adhesive

The SRP185HV is needed when installing the autoglass on many of today's sports and luxury vehicles. The high modulus formula adds the torsional stiffness to the vehicle’s windshield, while the non-conductive aspect protects the electronics embedded in the glass or encapsulation of the windshield. Also required on vehicles with aluminum body frames.

Required Primers and Accessories Supporting Products
Storage Requirements
Application Instructions
  • Apply adhesive to either the glass or pinchweld using a triangular bead approx 3/8 inch base by ½ inch height.
  • Replacement glass must be prepped with prior to adhesive application.
  • Scratches and exposed paint needs to be primed with SRP5025 Paint Primer prior to windshield replacement.
  • Use SRP185HV on vehicles that require a Non-Conductive Urethane.
  • See SRP Installation Manual for complete installation instructions.
  • Store between 60°F and 85°F (15.5°C and 30°C)