SRP180HV Urethane Adhesive
|
| The SRP180HV is a dependable everyday adhesive with quick drive away times and superior decking. Achieves dual airbag drive away times in as little as 1 hour. Trusted choice of European OEMs and glass shops across North America. |
Required Primers and Accessories
Supporting Products
|
Application Instructions
- Apply adhesive to either the glass or pinchweld using a triangular bead approx 3/8 inch base by ½ inch height.
- Replacement glass must be prepped with SRP7016 and primed with SRP5028 Glass Primer prior to adhesive application.
- Scratches and exposed paint needs to be primed with SRP5025 Paint Primer prior to windshield replacement.
- SRP Velocity must be used when temperatures drop below 20°F (-6°C).
- Use SRP185HV on vehicles that require a Non-Conductive Urethane.
- Use SRP160HT or SRP185HV on vehicles that require a High Modulus Urethane.
- See SRP Installation Manual for complete installation instructions.
|
Storage Requirements
- Store between 60°F and 85°F (15.5°C and 30°C)
Print this page. |
