SRP160HT Preheated Urethane Adhesive

When fast drive away times are required, the SRP160HT single component adhesive offers the speed and reliability you need for those jobs that require a one-hour drive away time.

Required Primers and Accessories
Supporting Products
  • SRP Oven
Storage Requirements
Application Instructions
  • Preheat SRP160HT in the SRP Oven for at least 1 hour.
  • Apply adhesive to either the glass or pinchweld using a triangular bead approx 3/8 inch base by ½ inch height.
  • Replacement glass must be prepped prior to adhesive application.
  • Scratches and exposed paint needs to be primed with SRP5025 Paint Primer prior to windshield replacement.
  • SRP Velocity must be used when temperatures drop below 15°F (-9°C).
  • Use SRP185HV on vehicles that require a High Modulus or Non-Conductive Urethane.
  • See SRP Installation Manual for complete installation instructions.

  • Store between 60°F and 85°F (15.5°C and 30°C)