Required Primers and Accessories
Supporting Products
Storage Requirements
- Store between 60°F and 85°F (15.5°C and 30°C)
|
Application Instructions
- Thoroughly clean replacement glass
- If replacement glass and frit look contaminated, it is recommended to use the SRP7000 One Step.
- SRP Velocity must be used when temperatures drop below 40°F (5°C).
- Apply adhesive to either the glass or pinchweld using a triangular bead approx 3/8 inch base by ½ inch height.
- Use SRP185HV on vehicles that require a Non-Conductive Urethane.
- Use SRP160HT or SRP185HV on vehicles that require a High Modulus urethane
- See SRP Installation Manual for complete installation instructions.
Print this page.
|
